Asus M2A-MVP - Motherboard - ATX User Manual page 69

Memory Configuraiton
Advanced
Memory configuration
Memory Frequency
CAS Latency (CL)
TRCD
TRP
TRAS
2T Mode
MCT Timing Mode
Bank Interleaving
Enable Clock to All DIMMs
MemClk Tristate C3/ATLVID
Memory Hole Remapping
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
Memory Frequency [Auto]
Allows you to select the DRAM Frequency programming method.
Configuration options: [Auto] [Limit] [Manual]
The following item appears when the Memory Frequency item is set to [Limit]
and [Manual].
Frequency [200 MHz]
Allows you to set the memory frequency.
Configuration options: [2�� M�z] [266 M�z] [333 M�z] [4�� M�z]
CAS Latency (CL) [Auto]
Configuration options: [Auto] [3.�] [4.�] [5.�] [6.�]
TRCD [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRAS [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK]~[18 CLK]
2T Mode [Auto]
Configuration options: [Auto] [Disabled] [Enable]
MCT Timing Mode [Auto]
Configuration options: [Auto] [Manual]
The following items appear when the MCT Timing Mode item is set to [Manual].
ASUS M2A-MVP
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Disabled]
[Enabled]
Select the DRAM
Frequency programming
method. If Auto,
the DRAM speed will
be based on SPDs.
If Limit, the DRAM
speed will not exceed
the specified value.
If Manual, the DRAM
specified will be
programmed regardless
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
2-21