Tools Menu - Asus M2A-MVP - Motherboard - ATX User Manual

Change User Password
Select this item to set or change the user password. The User Password item on
top of the screen shows the default Not Installed. After you set a password, this
item shows Installed.
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message "Password Installed" appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system. Configuration options: [Setup] [Always]
2.7

Tools menu

The Tools menu items allow you to configure options for special functions. Select
an item then press <Enter> to display the sub-menu.
ASUS EZ Flash 2
ASUS O.C. Profile
2-36
Press ENTER to run
the utility to select
and update BIOS.
This utility doesn't
support :
1.NTFS format
Chapter 2: BIOS setup