Asus M2A-MVP - Motherboard - ATX User Manual page 67

The following items appear only when the AI Overclocking item is set to
[Manual].
FSB Frequency [200]
Allows you to adjust the FSB frequency. The value of this item is auto-
detected by the BIOS. Use the <+> and <-> keys to adjust the FSB
frequency. You can also type the desired FSB frequency using the numeric
keypad. The values range from 200 to 400.
Processor Frequency (FID) [Auto]
This item is not configurable.
Processor Voltage (VID) [Auto]
This item is not configurable.
CPU:ATI-NB HT Link Speed [Auto]
Configuration options: [Auto] [x1 2�� M�z] [x2 4�� M�z] [x3 6�� M�z]
[x4 8�� M�z] [x5 1 G�z]
DDR Voltage [Auto]
Allows you to set the DDR memory voltage.
Configuration options: [Auto] [1.8� V] [1.9� V] [2.��V] [2.1� V]
Setting a very high voltage may damage the component permanently. Setting a
very low voltage may cause the system to become unstable.
NB and SB Voltage [Auto]
Configuration options: [Auto] [1.2� V] [1.3� V] [1.4� V] [1.5� V]
HyperTransport Voltage [Auto]
Configuration options: [Auto] [1.2�V] [1.3�V] [1.4�V] [1.5�V]
CPU Spread Spectrum [Enabled]
Configuration options: [Disabled] [Enabled]
PCIe Spread Spectrum [Enabled]
Configuration options: [Disabled] [Enabled]
ASUS M2A-MVP 2-19