Asus M2A-MVP - Motherboard - ATX User Manual page 93

Creating a RAID 0+1 configuration
To create a RAID 0+1 set:
From the ULI RAID BIOS Setup utility menu, move the cursor to Create
1.
RAID 0+1 Striping, Mirroring then press <Enter>.
2. The utility prompts the following warning message:
Data on first 4 drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
3. Key in a RAID name with a maximum of eight (8) alphanumeric characters
then press <Enter>. Do not use special characters or symbols.
4. The utility displays the RAID Array settings at the bottom of the screen.
Channel 0 Master: XXXXXXXXXXX
Channel 1 Master: XXXXXXXXXXX
Channel 2 Master: XXXXXXXXXXX
Channel 3 Master: XXXXXXXXXXX
RAID Array A
RAID Array B
RAID Array C
Creating a JBOD configuration
To create a JBOD set:
From the ULI RAID BIOS Setup utility menu, move the cursor to Create
1.
JBOD for integrated capacity then press <Enter>.
2. Use the up or down arrow keys to select a drive then press <Space> or
<Enter>. The striped mark "J" appears before a selected drive.
3. Repeat step 2 to select the second drive.
4. The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
ASUS M2A-MVP
Drive Model Mode
SATA 2
SATA 2
SATA 2
SATA 2
Capacity RAID Type
: XXXXX MB
:
:
Capacity
XXXXX MB
XXXXX MB
XXXXX MB
XXXXX MB
Stripe Size RAID Name
0+1 X4
RAID Array/Type
RAID A/RAID0+1
RAID A/RAID0+1
RAID A/RAID0+1
RAID A/RAID0+1
RAID01
2-45