Panasonic TY-TP42P10S - Touch-screen - Wired Operating Instructions Manual page 2

Accessories
Before assembling, attaching and connecting anything, check all accessories have been included in the
product package. Quantities are indicated in ( ).
USB cable 3 m (1)
Ferrite core (1)
Mounting bracket A
(2)
Mounting screw A
(9)
Rubber feet (6)*
Spacer (2)*
• Illustrations and screens appearing in these operating instructions are conceptual views and may differ
from the actual equipment.
• Windows is a registered trademark of Microsoft Corporation in the USA and other countries. (The offi cial name of
Windows is Microsoft
• The names of other companies and products appearing in this publication are the trademarks, registered
trademarks or products names of their respective owners.
2 2
Operating Instructions (8)
Mounting bracket B
(2)
Mounting screw B
(12)
* Affi x these rubber feet over the rubber feet that are already affi xed on the right
and left units and the bottom unit.
(For detail, see below)
• When you use the touch panel installed with the TH-42/50PF, TH-42/50PD,
or TH-42/50PH series display with the anti-glare fi lters (options).
• When you use the touch panel installed with the TH-42/50PH (however,
excluding PH10 series) or TH-42/50PD series display.
Black screw (long) (4)
Silver screw (short) (4)
Windows Operating System.)
® ®
• Japanese
• English
• German
• French
• Italian
• Spanish
• Russian
• Ukrainian
Vertical mounting
bracket (2)
Touch pen (1)
(p. 7)
* To use the plasma display with the below pedestal
models
Applicable pedestals:
[TY-ST08-K] [TY-ST08-S]→Use the black screws
(long) (p. 7)
[TY-ST20-K]→Use the silver screws (short) (p. 7)
CD-ROM (1)
Driver software
USB cable anchor
(1)
Velcro strip (2)
(p. 7)