Panasonic TY-TP42P10S - Touch-screen - Wired Operating Instructions Manual page 10

Mounting Touch Panel (in Horizontal Posture)
Lock the touch panel to the plasma display.
3

Loosen mounting screw A on mounting bracket B (temporarily held) and rotate the bracket 90
degrees, as shown in the diagram, fi t the protrusion located above the round hole on mounting bracket
B into the hole of the bottom unit. Tighten both mounting screws A by hand.

Turn the screws on mounting brackets A and B until the gap between the touch panel and plasma
display is closed, then make 2 more full turns to lock in place.
10
Mounting screws A
Mounting
bracket B
Screw
Protrusions
