Using A Display Adapter Card - Epson Progression Setup Manual

Using a Display
If you are not using a VGA monitor or if you want to install a
display adapter card to control your VGA monitor, read the
guidelines in this section.
Note
Skip this section if you connected your monitor to the
computer's VGA port.
before you can connect a monitor to a display adapter card, you
must install the card in your computer. If you (or your dealer)
have not already installed it, follow the instructions in
Chapter 3 of the User's Guide to install an option card.
When installing the card, check to make sure any switches or
jumpers on the card are set properly. For example, you may
need to change a switch setting to select color or monochrome.
See the documentation that came with your monitor and
display adapter card for instructions.
If you install a high-resolution graphics adapter card that
to an alternate
connects
connector"), see Chapter 3 of the User's Guide for instructions
on connecting the card to the feature connector on the main
system board.
Note
If you install a display adapter card, you must set jumper
JP7 on the main system board to disable the built-in VGA
port. (You do not have to do this if you
the VGA feature connector on the main system board.) You
may also need to set jumper JP5 to indicate whether you are
using a color or monochrome monitor. See Chapter 3 of the
User's Guide for instructions on changing jumper settings.
Adapter Card
G interface (also called a "feature
V A
connected the card to
Setting Up Your System 1-7