Web Access Control - D-Link VWR-VR - Broadband Telephone Adapter/Wireless Router User Manual

Chapter 3 - Configuration

Web Access Control

To configure the Vonage VWR Device from a remote computer using a web browser,
check Enable and enter the following:
Choose Connection - Select WAN.
Remote Host IP - Enter the IP address of the remote computer. Enter 0.0.0.0 to allow
any remote computer to connect.
Remote Netmask - Enter the subnet mask of the remote computer. Enter 255.255.255.255
to allow any remote computer to connect.
Redirect Port - Enter the port number you would like to use.
D-Link VWR User Manual 32