Table of Contents
Advertisement
Chapter 3 - Configuration
WAN
Dynamic IP Address
Select Dynamic IP Address to obtain IP Address information automatically from your
ISP. Select this option if your ISP does not give you any IP numbers to use. This option is
commonly used for cable modem and satellite services.
Name - The host name is optional but may be required by some ISPs.
MAC Address - The default MAC Address is set to the Internet port's physical interface
MAC address on the Vonage Router. It is not recommended that you change the default
MAC address unless required by your ISP. You can enter your PC's MAC Address
manually to replace the Internet port's MAC address with the MAC address of your
Ethernet card.
Apply ISP DNS and SNTP - Check this box to use the DNS servers and time server
(SNTP) supplied by your ISP.
D-Link VWR User Manual
8
Advertisement
Table of Contents
