Hardware Installation - TRENDnet TEW-631BRP Quick Installation Manual

2. Hardware Installation

Note: Gather all information related to your Internet Connection before you
start. If necessary, contact your Internet Service Provider (ISP).
1. Verify that you have an Internet
connection when connecting your
computer directly to the Cable or
DSL modem.
2. Connect one end of the yellow
RJ-45 cable to one of the
TEW-631BRP's LAN ports.
Connect the other end of the cable
to the computer's Ethernet port.
Then connect the 4dBi detachable
antenna.
3. Connect one end of a RJ-45 cable
to the TEW-631BRP's WAN port.
Connect the other end of the cable
to your modem.
4. Connect the AC Power Adapter to
the TEW-631BRP and then to a
power outlet.
5. Verify that the following panel lights
are on: Power, LAN, WAN and
WLAN.
Internet
2
English
Cable/DSL Modem