TRENDnet TEW-631BRP Quick Installation Manual page 8

Quick installation guide

Hide thumbs Also See for TEW-631BRP:

Q4:

All the settings are correct, but I can not make a wireless connection to the

Modem. What should I do?

A4:

First, make sure that the WLAN switch on the back of the router is set to on.

Second, double check that the WLAN light on the Router is lit. Third, power cycle

the TEW-631BRP. Unplug the power to the TEW-631BRP. Wait 15 seconds, then

plug the power back in to the TEW-631BRP. Fourth, log into the TEW-631BRP

(see Section 3). Click on Basic and then Wireless. Make sure Enable Wireless

is checked. Fifth, contact the manufacturer of your wireless network adapter and

make sure the wireless network adapter is configured with the proper SSID. The

preset SSID of the Access Point is TRENDnet.

If you still encounter problems or have any questions regarding the TEW-631BRP,

please contact TRENDnet's Technical Support Department.

Table of Contents