Table of Contents
Advertisement
Configuration Setup
[KEY OPERATION]
Select [Configure], then press <ENTER>.
The Configuration setup window appears.
[KEY OPERATION]
Use the cursor keys to select an item, then press <ENTER> or <SPACE BAR> to execute the
selection. Press the <ESC> key to exit the Configuration window.
1
ITEM
Mode
Port Address
IRQ Number
DMA Channel
CD-ROM Interface
CD-ROM Models
Game Port
Input Source
Port:
The I/O (Input/Output) port facilitates transmission and reception of computer data between the CPU and external
devices. The CPU determines the setup address of the sound card using this port. You cannot select an address for a
device if you have already assigned that address to other devices.
IRQ:
The IRQ (Interrupt Request) number allows external devices to transmit or receive data by priority, according to the IRQ
number assigned to each external device, while the CPU is processing data. The lower the IRQ number, the higher the
data processing priority.
Please take care in advance when assigning IRQ numbers to each device in order to avoid data processing conflicts.
DMA:
DMA (Direct Memory Access) is the communication protocol between internal memory and external devices that minimizes
the work of the CPU. As with the IRQ number, you cannot select an active channel.
CONTENTS
Choose either SB (SoundBlaster) or
WSS (Windows Sound System)
Set port address
Select interrupt request number
Select channel
Enables CD-ROM function
Select CD-ROM type (select one to
activate the setup window)
Enables Joystick port function
Select MIC or LINE input
1
2
DEFAULT
SB
220
5
1
Disable
Sony/
Panasonic
Disable
MIC
Appendix
67
Advertisement
Table of Contents
