Operation - Yamaha Sound Edge Manual

Sound Edge Application Software
2 Type:

Operation

22
1. First select the desired source ([Mic] or [Line/Synth]) from the [Source] menu.
2. Click on the effect type icon that you want.
3. Use a microphone or CD (or other audio device) to input sound to be effected.
Setting Output Level and LFO Settings
You can adjust the output gain level or LFO settings for various effects.
1. Select [Gain/LFO Setup] from the [Control] menu. The Control Panel window appears.
2. Adjust the Gain/LFO settings for the output level and the LFO.
3. When you've finished, click [OK]. The Control Panel window closes and the previous
Control
Gain/LFO Setup:
Lets you open the Control Panel to set up the output ("Gain") level or the LFO settings.
Help
Contents:
Lets you open the Online Help.
About VoiceMorph:
Lets you see information about this version of VoiceMorph.
There are 16 different types of voice change programs which will appear in the window.
Selecting [Thru] will let the original sound signal pass through without applying a VoiceMorph
effect.
window appears.
Output Gain: Lets you adjust the
output gain level by moving the slider
to the left (Min) and right (Max).
LFO (Low Frequency Oscillator):
Lets you control the depth and speed
of the LFO. The LFO changes sound
pitch, tone or volume in a cycle
determined by depth and speed
values.
• Depth
Adjust LFO depth by moving the
slider to the left (Min) and right
(Max).
• Speed
Adjust LFO speed by moving the
slider to the left (Slow) and right
(Fast).
LFO is applicable to the
following effect types: Vibrato,
Stereo Vibrato, Saw, Stereo Saw,
Random, Stereo Random and
Fast Pan effects.