Connections - Yamaha Sound Edge Manual

CONNECTIONS

MAKING CONNECTIONS
The following diagram shows how to connect the various devices.
Joystick
4
¢Before making connections, be sure to UNPLUG THE POWER SUPPLY CORDS OF ALL DEVICES.
After making connections, switch on the power of each device in the following order: External MIDI devices first, then the
computer, then external audio devices. (NOTE: MAKE SURE TO TURN DOWN THE VOLUME LEVELS OF THE
EXTERNAL AUDIO DEVICES BEFORE TURNING THEM ON.) When turning off the power of each device, simply
reverse the process.
¢Improper connection of microphone and other external devices may cause ear injury or damage to
hardware.
£There are various types of audio in and out jacks, so make sure to select the proper cables and adaptors
according to your respective devices.
£For information about jacks, see page 5.
PC/AT Computer
External MIDI synthesizer, etc.
MIDI OUT
Yamaha MIDI Adaptor Cable MDC-01
Power Speakers
Sound Edge
Sound Card
LINE IN
MIDI/JOYSTICK OUTPUT MIC
Dsub
-15 pin Mini Jack
Audio Cable
Portable Cassette Recorder
or Stereo (for inputting
external sounds)
CD-ROM Drive
Audio Out
Stereo Mini Jack
Microphone