Remote Operation - Yamaha MOTIF RACK Music System Owner's Manual

Remote Operation

The Multi Part Editor can be operated remotely by a hardware controller, such as the Yamaha
Digital Mixing Studio 01X. Below is an example of remote operation using the 01X, when the Multi
Part Editor is running as a plug-in under SQ01. After configuring the remote MIDI port settings,
press [REMOTE] then [MIDI] on the 01X to start the Multi Part Editor.
When starting the Multi Part Editor from the Studio Manager, press [SHIFT]+[REMOTE] to start
the Multi Part Editor.
n
Set the appropriate ports required for remote operation beforehand
Edit mode & NAME
Part Detail
Window
Parameter category
Part EQ
EQL-F EQL-G EQH-F EQH-G
Parameter name
Edit mode &
VALUE
Parameter name
EQL-F EQL-G EQH-F EQH-G
125 0.0 10.0 0.0
Parameter value
Part Detail
Window
Common Detail
Window
Remote
Part being edited
SEL<Part3>
EQM-F EQM-G EQM-Q
EQM-F EQM-G EQM-Q
1.1 0.0 PEAK
Remote
Common
Detail Window
(page
Mixing mode & NAME
Part Mixer
Window
Part name
Part1 Part2 Part3
Pan Pan Pan
Parameter name
Parameter name
Pan
L63 R63 L63
Parameter value
Part Mixer
Window
34
11, 31).
Remote
Part4 Part5 Part6 Part7 Part8
Pan Pan Pan Pan Pan
Mixing mode &
VALUE
R63 CTR CTR CTR CTR
Remote