System Tab Screen; Mlan8P - Yamaha mLAN Mixer Owner's Manual

System Tab Screen

You can make settings related to the mLAN8P/mLAN8E on this screen.

mLAN8P

A Mixer Type
You can assign EQ and Dyna for up to eight chan-
nels. The assignments for channels 1-4 are fixed.
You can assign EQ and Dyna for the other four
channels here.
1: EQ and Dyna are assigned to channels 5-8.
2: EQ and Dyna are assigned to channels 5-6 and
Digital in.
3: EQ and Dyna are assigned to channels 5-6 and
A/D in.
4: EQ and Dyna are assigned to Digital in and A/
D in.
B Mix Meter Source (Level Meter Source)
This parameter enables you to select a signal to
display on the master track level meter.
Stereo Mix: Displays the stereo output signal.
Effect Return: Displays the effect return signal.
AUX1/2: Displays the AUX1/2 master output sig-
nal.
C Meter Setting
This parameter enables you to select the type of
level meter display.
Peak Hold ON: The meter holds the peak level
until you turn off "Peak Hold."
Peak Hold OFF: The meter does not hold the peak
level.
Fall Time: This parameter sets the speed of the
meter's response to the decaying sound.
Normal: Normal response speed
Fast: The meter responds quickly to and reflects
the attenuating sound. This setting clarifies the
attack level on the meter.
OFF: The level meter is not displayed.
D Digital Input
This parameter enables you to select Optical or
Coaxial for the input signal at the Digital In con-
nector on the mLAN8P.
E Digital Output
This parameter specifies the signal routed to the
Digital Out connector on the rear panel of the
mLAN8P.
Settings: Stereo Mix, AUX1/2, Coaxial/Optical In,
A/D In
14