Mlan8E - Yamaha mLAN Mixer Owner's Manual

mLAN8E

The signal specified by the Analog Output source parameter is also output to con-
nected headphones.
A
Mixer Type
You can assign EQ and Dyna to up to eight chan-
nels.
1: EQ and Dyna are assigned to channels 1-8.
2: EQ and Dyna are assigned to channels 1-6 and
9-10.
3: EQ and Dyna are assigned to channels 1-4 and
9-12.
4: EQ and Dyna are assigned to channels 9-16.
B Mix Meter Source (Level Meter Source)
This parameter enables you to select a signal to
display on the master track level meter.
Stereo Mix: Displays the stereo output signal.
AUX1/2: Displays the AUX1/2 signal.
AUX3/4: Displays the AUX1/2 signal.
AUX5/6: Displays the AUX1/2 signal.
C Meter Setting:
This parameter enables you to select the type of
level meter display.
Peak Hold ON: The meter holds the peak level
until you turn off "Peak Hold."
Peak Hold OFF: The meter does not hold the peak
level.
Fall Time: This parameter sets the speed of the
meter's response to the decaying sound.
Normal: Normal response speed
Fast: The meter responds quickly to and reflects
the attenuating sound. This setting clarifies the
attack level on the meter.
OFF: The level meter is not displayed.
D Word Clock
This parameter specifies the word clock for the
mLAN8E.
Settings: Internal44.1k, mLAN (follows the unit's
or mLAN Patchbay's setting.)
E Device Fs
This field displays the actual sampling frequency.
16