Using The Assemble Edit Function; Recording From Another Vcr Or Camcorder - Samsung SV-272I Instruction Manual

Using the Assemble Edit Function

This function allows you to start a new recording at a
specific position on the cassette while maintaining a
very smooth scene change
1
Insert the cassette to be edited in your VCR.
2
Press the ❿ll button to start playback.
3
When you reach the position from which you wish
to start the new recording, press the
4 F.ADV
Press the F.ADV ( ) button again as often as
necessary to advance frame by frame, until the
exact recording position is located.
5
While the VCR is in still mode, hold the REC button
down for a while to activate the Assemble Edit
function.
Result: Record symbol flashes in the display.
6
Select the source from which you wish to record by
pressing:
The PROG/TRK (
buttons for television channels
The INPUT button for the LINE IN 1 or
LINE IN 2 (SV-677I/SV-476I only) input
sources
7
Press the ❿ll button to start recording.
8
When you have finished recording, press
❿ll button.
or )/ PROG ( or )
❷ ❷
.
Recording from Another VCR or
Camcorder
You can copy a cassette to your VCR from another
video source, such as another VCR or a camcorder.
It is an infringement of copyright laws to
copy prerecorded cassettes or to re-record
them in any form without the permission of
the owners of the corresponding copyright.
1
Connect the VCR, from which the cassette is to be
copied, to the appropriate RCA audio and video
input connectors on the rear of your VCR, as
indicated on page 12.
You can also use an RCA audio and video cable to
connect the LINE IN 2 input on the front of your
VCR. (SV-677I/SV-476I only)
2
Insert a blank cassette in your VCR.
3
Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
4
Press the INPUT button to select the appropriate
input on your VCR:
LINE IN 1 for the rear input
LINE IN 2 for the front input
only)
5
Start playing back the cassette to be copied.
6
Hold REC down for a while to start recording on
your VCR.
7
When you have finished recording, press
both VCRs.
If you wish to view the cassette being copied:
Your VCR must be connected as usual to the
television (see page 9~10 for further details)
ENG-27
(SV-677I/SV-476I
on