Table of Contents
Advertisement
Using the Timer Programming Feature
The Timer Programming feature allows you to preset
the VCR to record a programme up to one month
before that programme is to be broadcast. Up to six
programmes can be preset.
Before presetting a recording, check that the
date and time are correct.
1
Insert the cassette. Press the TIMER button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
PROG
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
TIMER PROGRAMMING
➛❿
OK
END:
❷
❿
2
Press
to select the input source.
3
Select the required station by pressing the
buttons or INPUT to select the LINE IN 1 or
LINE IN 2 (SV-677I/SV-476I only) input sources.
1/JAN THU
PROG
PR
DAY
START
L1
WE 1
12:00
--
----
--:--
--
----
--:--
--
----
--:--
--
----
--:--
--
----
--:--
➛❿
❷
DELETE:CLR/RST
❿
4
Press
to select the recording day.
5
Select the required day by pressing the
buttons.
❿
6
Press
to select the recording start time.
7
Select the required hour value by pressing the
or
❷
buttons.
❿
8
Press
to select the minutes.
9
Select the required minute value by pressing the
or
❷
buttons.
❿
10
Press
to select the recording end time.
11
Select the required recording end time by pressing
the
or
❷
buttons, following the same procedure
as when selecting the recording start time.
MENU
,
❷
21:28
STOP
12:50SP
--:----
--:----
--:----
--:----
--:----
MENU
or
❷
❿
12
Press
to select the the recording speed
(AUTO/SP/LP).
13
Press the
or
AUTO, SP (Standard Play) or LP (Long Play).
14
When you have finished, press the MENU button.
15
Press the VCR STANDBY/ON button to activate the
timer.
Result: Before starting recording, the VCR
compares the timer duration with the
remaining time on the cassette.
Auto Tape Speed Select
The VCR's "Auto Tape Speed Select" function
compares the duration of the timer recording to the
actual recording time remaining on the tape loaded.
If there is insufficient tape to complete a timer
recording in AUTO mode, the VCR automatically
switches to LP mode to record the whole
programme.
E.g. If there is a one hour AUTO mode timer
recording to be started, but only 40 minutes of
tape remaining, the VCR will record in SP for
20 minutes and switch to LP mode for the
remaining 40 minutes.
ENG-19
❷
buttons to switch between the
Advertisement
Table of Contents
