Interval Repeat Play; Using The Tape Counter - Samsung SV-272I Instruction Manual

Interval Repeat Play

You can set interval repeat play to repeat the cassette
several times for special interval.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding
NO. OF INTERVAL REPEAT option is selected.
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
❿
END:
❷
5
To...
Interval Repeat Play
Cancel Interval Repeat Play OFF is displayed.
6
On completion, press MENU twice to exit the menu.
7
To select Interval Repeat Play during playback,
press the INPUT/REPEAT button at the desired
start point.
Result: "INTERVAL REPEAT SETTING" is
displayed.
Press the INPUT/REPEAT button one more time at
the desired end point.
Result: The tape is automatically rewound to the
start point. "INTERVAL REPEAT" is
displayed.
➛ ❿
,
or , buttons to
❷
or buttons, until the
❷
MENU
❿
Press until...
5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
ENG-25

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and
record modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence
easily
If the remaining time is to be calculated
correctly, you must indicate the type of cassette
being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of
a sequence:
Press DISP./ or DISPLAY twice to display
the counter
Press CLR/RST when you want to set the tape
counter to zero
3
When you are ready,
Start playback or Recording.
Press the button.
To fast-forward or rewind to the sequence at
which the counter was set to zero, press
➛ ➛ or ❿ ❿.
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 12).
Press DISP./ or DISPLAY:
Once to display the current function,
programme number, recording speed, date,
time and counter
Twice to display the counter only
Three times to display the time remaining
on the cassette
Four times to clear the display
0:00:00