Clearing A Preset Station; Changing The Preset Station Table - Samsung SV-272I Instruction Manual

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
MANUAL SET UP option is selected.
❿
5
Press the button to select this option.
Result: The TV STATION TABLE menu is
displayed.
6
Press the corresponding
required preset TV station (PR) is selected.
7
Press the CLR/RST button.
8
Repeat the same procedure from Step 6 onwards
until all the required stations have been cleared.
9
On completion, press the MENU button three times
to exit the menu.
➛ ❿
,
or , buttons to
❷
or buttons, until the
❷
or buttons, until the
❷
ENG-16

Changing the Preset Station Table

You can rearrange the Station Table and give different
programme numbers to the stations listed according to
your own preferences.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
MANUAL SET UP option is selected. And then
❿
press the button to select this option.
Result: The TV STATION TABLE menu is displayed.
** TV STATION TABLE **
PR CH SYSTEM
1 005 I
2 --- I
3 --- I
4 --- I
5 --- I
❿
SWAPPING:
❷
DELETE: CLR/RST
5
Press the corresponding
required preset TV programme is selected.
Result: The selected station is displayed at the
same time on the television screen.
** TV STATION TABLE **
PR CH SYSTEM
1 --- I
2 --- I
3 005 I
4 --- I
5 --- I
❿
SWAPPING:
❷
DELETE: CLR/RST
6
To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
7
Press the or buttons to select required
❷
position. And then press OK again to swap the
position.
8
You can modify this station by repeating the same
procedure from Step 5 onwards.
9
On completion, press the MENU button three times
to exit the menu.
➛ ❿
,
or , buttons to
❷
or buttons, until the
❷
OK
MENU
or buttons, until the
❷
OK
MENU