Table of Contents
Advertisement
Presetting the Stations Manually
Your VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
Plug & Auto Set up (see page 11)
Automatically (see page 14)
Manually
You can store up to 50 stations.
You do not need to preset the stations manually if
you have already set them automatically.
To enable the VCR to decode a scrambled TV
station, the decoder must be switched on.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
MANUAL SET UP option is selected.
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:I
VCR OUTPUT CH :CH36
❿
END:
❷
❿
5
Press the
button to select MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
** TV STATION TABLE **
PR
CH
SYSTEM
1
005
I
2
---
I
3
---
I
4
---
I
5
---
I
❿
SWAPPING:
❷
DELETE:
CLR/RST
6
Press the
or
buttons to select a programme
❷
number as required.
❿
7
Press the
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8
Press the corresponding
SYSTEM is selected.
➛
❿
,
or
,
buttons to
❷
or
buttons, until the
❷
MENU
OK
MENU
or
buttons, until the
❷
ENG-15
9
Select the required system by pressing the
buttons.
➛
❿
10
Press the
or
buttons to start scanning.
Result: The frequency band is scanned and the
first station found is displayed.
If you know the number of the channel you want,
press the numeric buttons on the remote control for
example, for channel 04, first press "0" and then
press "0", "4" (see page 31).
** MANUAL TUNING **
SYSTEM
: I
PR
: 1
CH
: ---
MFT
:
-
➛❿
MEMORY:
❷
11
If you...
Then...
Wish to store the
station displayed
❷
adjust the picture, if necessary.
Do not wish to
store the station
❷
displayed
selected.
12
Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
13
On completion, press the MENU button three times
to exit the menu.
➛
or
OK
MENU
Press the corresponding
buttons, until the MFT is
selected.
➛ or ❿
Press the
buttons to
Press OK to store the station
Press the corresponding
buttons, until the CH is
➛ or ❿
Press the
buttons to
go on scanning the
frequency band and display
the next station
Go back to the beginning of
Step 9
❿
,
,
Advertisement
Table of Contents
