Presetting The Stations Manually; Clearing A Preset Station - Samsung SV-640X Instruction Manual

Presetting the Stations Manually

Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Plug & Auto Set up (see page 12)
Automatically (see page 17)
INSTALL
PROG OPTIONS INSTALL
Manually
You can store up to 80 stations.
CLOCK BONUS LANG
INSTALLATION
You do not need to preset the stations manually if you
have already set them automatically.
➛❿!!
OK END: MENU
" ❷!!
1
Press the MENU button on the remote control.
Result:
2
Press the corresponding
INSTALL INSTALLATION
AUTO SET UP
MANUAL SET UP
3 Press the OK button to select this option.
VCR OUTPUT CH :CH36
Result:
4 Press the corresponding
UP option is selected.
❿ 5 Press the ❿ button to select
END: MENU
" ❷
Result:
6
Press the
required.
** TV STATION TABLE **
7 Press the ❿!!button to preset the station.
PR CH NAME
Result:
1 002 CAEB
2 --- ----
8 Press the ➛ or ❿ buttons to start scanning.
3 --- ----
Result:
4 --- ----
5 --- ----
If you know the number of the channel you want, press the
❿ SWAPPING:OK
" ❷
numeric buttons on the remote control for example, for channel
DELETE:CLR/RST MENU
06, first press "0" and then press "6". (see age 44)
9
Press the
10 To change the programme's name, press the ❿!button.
** MANUAL TUNING **
Result:
PR : 1
11 To...
CH : ---
MFT : -
NAME : ---- Select a character
in the name
➛❿ MEMORY: OK
" ❷
END: MENU Move to the next or
previous character
12 If you...
Wish to store the
station displayed
Do not wish to
store the station
displayed
13 Repeat this procedure from Step
stations have been stored.
14
On completion, press the MENU button three times to exit the menu.
18
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
" ❷
option.
The INSTALLATION menu is displayed.
or buttons, until the MANUAL SET
" ❷
MANUAL SET UP option.
The TV STATION TABLE menu is displayed.
or buttons to select a programme number as
" ❷
The menu is displayed.
MANUAL TUNING
The frequency band is scanned and the first station
found is displayed.
or buttons until the NAME is selected.
" ❷
The first letter of the name flashes.
Then...
Press the or button until the
" ❷
required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
respectively.
Then...
Press the corresponding or buttons,
" ❷!
until the MFT is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station .
Press the corresponding or buttons,
" ❷!
until the CH is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
12
Go back to the beginning of Step
6 onwards, until all the required

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1 Press the MENU button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
" ❷
INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding or buttons, until the MANUAL SET
" ❷
option is selected.
UP
5 Press the ❿ button to select this option.
Result: The menu is displayed.
TV STATION TABLE
6
Press the corresponding or buttons, until the required preset
" ❷
TV station (PR) is selected.
7
Press the CLR/RST button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the MENU button three times to exit the
menu.
GB
PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿!!
" ❷!! OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❿
END: MENU
" ❷
** TV STATION TABLE **
PR CH NAME
1 002 CAEB
2 --- ----
3 --- ----
4 --- ----
5 --- ----
❿ SWAPPING:OK
" ❷
DELETE:CLR/RST MENU
19