Clearing A Preset Station; Changing The Preset Station Table - Samsung SV-3000 Instruction Manual

Clearing a Preset Station

GB
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿¤¤
OK END: MENU
œ ❷¤¤
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
❿
œ ❷ END: MENU
** TV STATION TABLE **
PR CH
1 002
2 ---
3 ---
4 ---
5 ---
❿
SWAPPING:OK
œ ❷
DELETE:CLR/RST MENU
20
If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
option.
INSTALLATION
3 Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the
UP option is selected.
Press the ❿ button to select this option.
5
Result: The TV STATION TABLE menu is displayed.
6
Press the corresponding or buttons, until the required preset
œ ❷
TV station (PR) is selected.
7 Press the CLR/RST button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9
On completion, press the MENU button three times to exit the
menu.

Changing the Preset Station Table

You can rearrange the preset TV stations according to your own
preferences programme number assigned to the station.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
INSTALLATION
3
Press the OK button to select this option.
Result: The
4
Press the corresponding
UP option is selected.
And then press the ❿ button to select this option.
Result: The
5
Press the corresponding
MANUAL SET
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
6
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7
Press the œ or
press OK again to swap the position.
8
You can modify this station by repeating the same procedure from
5
Step onwards.
9 On completion, press the MENU button three times to exit the
menu.
or ➛, ❿ buttons to select the
,
œ ❷
option.
INSTALLATION menu is displayed.
œ or ❷ buttons, until the MANUAL SET
TV STATION TABLE menu is displayed.
œ or ❷ buttons, until the required preset
❷ buttons to select required position. And then
GB
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
❿
END: MENU
œ ❷
** TV STATION TABLE **
PR CH
1 002
2 ---
3 ---
4 ---
5 ---
œ ❷ SWAPPING:OK
MENU
** TV STATION TABLE **
PR CH
1 ---
2 ---
3 002
4 ---
5 ---
œ ❷ SWAPPING:OK
MENU
21