Tuning Your Television For The Vcr; Setting The Date And Time - Samsung SV-270GX Instruction Manual

Tuning Your Television for the VCR

You must tune your television for the VCR only if you
are not using a Scart cable
To view pictures from your VCR when a Scart cable
is used, the television must be set to the
audio/video mode (AV).
1
Switch on the television.
2
witch on the VCR by pressing STANDBY/ON on
the front of the VCR or VCR STANDBY/ON
(STANDBY/ON) on the remote control.
3
Select a programme position on the television to
be reserved for use with your VCR.
4
Insert the video cassette in the VCR. Check that
the VCR starts reading the cassette; if not, press
button.
❿ II
5
Start a scan on your television or set the television
to UHF channel 36.
6
Fine tune the television until the pictures and sound
are obtained clearly.
7
If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the VCR output
channel (see Setting the VCR Output Channel on
page 11 and Problems and Solutions on page 30p).
8
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
Result: That programme is now reserved for use
with your VCR.

Setting the Date and Time

our VCR contains a 24-hour clock and calendar used
to:
Automatically stop programme recording
Preset your VCR to record a programme
automatically
You must set the date and time when:
You purchase the video cassette recorder
Do not forget to reset the time when
you change clocks from winter to
summer time and vice versa.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the CLOCK SET option.
3
Press the OK button to select this option.
Result: The CLOCK SET menu is displayed.
4 Press ➛ or ❿ to select the hour, minutes, day,
month and year.
Result: The option selected flashes.
5
Press the or
the value.
Result: The day of the week is displayed
automatically.
You can hold the
scroll more quickly through the values.
6
On completion, press MENU twice to exit the
menu.
ENG-10
➛ ❿
,
or , buttons to
❷
buttons to increase or decrease
❷
or buttons down to
❷