Tuning Your Television For The Vcr - Samsung SV-635X Instruction Manual

Tuning Your Television for the VCR

You must tune your television for the VCR only if you are not using
a Scart cable
(SV-631X/SV-6315X/SV-6313X/
(SV-635X)
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
STANDBY/ON 1
Switch on the television.
VCR STANDBY/ON
2
Switch on the VCR by pressing STANDBY/ON on the front of the
2 2 VCR or VCR STANDBY/ON (STANDBY/ON) on the remote
SLO
SLO
control.
SHUT
SHUTT 3 Select a programme position on the television to be reserved for
use with your VCR.
4 4 Insert the video cassette in the VCR. Check that the VCR starts
reading the cassette; if not, press
OK
5 Start a scan on your television or set the television to UHF
channel 36.
6 Fine tune the television until the pictures and sound are obtained
clearly.
7 If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the VCR output channel (see Solving Problems section of this
manual).
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result:
14
To view pictures from your VCR when a Scart cable is
used, the television must be set to the audio/video mode
(AV).
❿ II
button.
That programme is now reserved for use with your VCR.