Ipc (Intelligent Picture Control); Plug & Auto Set Up; Tuning Your Television For The Vcr; Setting The Date And Time - Samsung SV-M35K Instruction Manual

Plug & Auto Set Up
Your VCR will automatically set itself up when it is
plugged into the mains for the first time. TV stations
will be stored in memory. The process takes a few
minutes. Your VCR will then be ready for use.
1
Connect the coaxial cable as indicated on
8~9. (Connecting Your VCR to the TV Using the
Coaxial Cable)
TV
LINE LINE
OUT IN 1
R
AUDIO
L
TV
VIDEO
2
Plug the VCR into the mains.
Result: The LANGUAGE SET menu is displayed.
3
Select the required language by pressing the
buttons.
❷
4 Press OK to store the language selected.
Result: A message appears.
5
Press OK to start the auto scanning.
6
Press the corresponding or ❷ buttons, to
select the your SYSTEM SELECT. Press the OK
button to select this option.
The number of stations automatically stored by
the VCR
7
The CLOCK SET menu is displayed.
(See Setting the Date and Time on page 9)
8
On completion, press MENU twice to exit the menu.
9 This will only happen if you have tuned TV to VCR or
AV cables are connected and TV is switched to AV.
Auto preset can be performed by pressing
(STOP) on the VCR continuously for 5 seconds or
more with no tape inserted.

Tuning Your Television for the VCR

You must tune your television for the VCR only if you
are not using a RCA cable
To view pictures from your VCR when a RCA
cable is used, the television must be set to the
audio/video mode (AV).
1
Switch on the television.
2
Switch on the VCR by pressing STANDBY/ON on
the front of the VCR or VCR STANDBY/ON on the
remote control.
3
Select a programme position on the television to be
reserved for use with your VCR.
4
Insert the video cassette in the VCR. Check that
the VCR starts reading the cassette; if not, press
button.
❿ II
5
Start a scan on your television or set the television
to UHF channel 36.
6
Fine tune the television until the pictures and sound
or are obtained clearly.
7 If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the VCR output
channel (see Setting the VCR Output Channel on
page 12 and Problems and Solutions on page 30).
8
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
Result: That programme is now reserved for use
with your VCR.
ENG-10

Setting the Date and Time

Your VCR contains a 24-hour clock and calendar used to:
Automatically stop programme recording
Preset your VCR to record a programme
automatically
You must set the date and time when:
You purchase the video cassette recorder
The power supply remains off for more than 1
hour (SV-M625K only)
The power supply remains off for more than 30
sec (SV-M85K/SV-M35K only)
Do not forget to reset the time when you
change clocks from winter to summer time
and vice versa.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
➛ ❿
2 ,
Press the corresponding or , buttons to
❷
select the CLOCK SET option.
PROG OPTIONS INSTALL
CLOCK
CLOCK BONUS LANG
CLOCK SET
➛❿
OK END: MENU
❷
3
Press the OK button to select this option.
Result: The CLOCK SET menu is displayed.
➛ ❿
4 Press or to select the hour, minutes, day,
month and year.
Result: The option selected flashes.
CLOCK
12:00 1/JAN/2004
THU
AUTO CLOCK : ON
➛❿
❷ END: MENU
5
Press the or buttons to increase or
❷
decrease the value.
Result: The day of the week is displayed
automatically.
You can hold the or ❷ buttons down to
scroll more quickly through the values.
6
On completion, press MENU twice to exit the menu.
Displaying/Hiding On-Screen
Information
Your VCR displays most information both on the VCR
and the television.
You can choose to display or hide this information on
the television screen (except for the Index,
Programming MENU which cannot be hidden).
1
Press MENU on the remote control.
Result: The programming menu is displayed.
➛ ❿
2 ,
Press the corresponding or ,
❷
select the USER SET option.
PROG OPTIONS INSTALL
OPTIONS
CLOCK BONUS LANG
USER SET
➛❿
OK END: MENU
❷
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the
❷
OSD option is selected.
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
❿
END: MENU
❷
➛
5
To... Press or
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
6
On completion, press MENU twice to exit the
menu.
ENG-11
buttons to
❿
, until...