Date/Time Setting (Setting Current Time); Selecting Pulse/Tone Dial Type; Transferring Calls - Samsung SP-C801RBL Manual

900 dsp wide-900mhz phone
Table of Contents

Advertisement

Date/Time setting
(setting the current time)
● You need to setup the current time in order to see the
message recorded time and to use the morning call
function.
Operating procedure
1
2
Press 8 digits in the
order of day, month,
hour and minute.
Or
1
2
Press 8 digits in the
order of day, month,
hour and minute.
Selecting pulse / tone dial type
1
The number 2 will blink on the screen and the recorded voice will tell you the current type.
You can toggle between the two types by pressing 2.
12
●To see the currently set time, place the handset in the base
set and press
button. In case of a power shutdown, it
will erase the date and time. Therefore, you will have to set
it up once again.
(press the following buttons in ordered sequence)
3
When the date and
time has been set,
you can hear the
currently set date
3
4
and time in a
recorded voice.
Ex) March 6th, 15:05
2
3

Transferring calls

How to transfer from
to
1
Press
button and hang up the handset.
When additional Remote sets are registered
Press
button and then press the internal number you wish the transfer to go.
(If you do not designate a particular number, then all the registered Remote sets will ring.)
How to transfer from
to
1
Press
button and hang up the Remote set.
When additional Remote sets are registered
You can transfer calls among Remote sets. Press the Intecom button and press the intercom number you wish the
transfer to go.
When the Intercom transfer does not work
If nobody answers the call, on the base set within 15 seconds, then the call will be transferred back to the Remote
set. Furthermore, if this call is not answered for another 15 seconds, the call will automatically be hung up.
@@@ @@ @@
@@@
during a call.
2
3
Pull out the
Remote set from
the charger and
press
button.
● If the Remote set is not
When you hear the
placed on the charger,
intercom ringing
just press
button.
during a call.
2
3
Pick up the handset in the
base set to receive the call.
When you hear the
● Or you can press
intercom bell
button to receive the call.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp-c801rglSp-c801rslSp-c801r

Table of Contents