Table of Contents
Advertisement
Phone installation
Installing the base set
Installing the Remote set
Turning on or off the power of Remote set
● To turn on the power: Press
● If it does not turn on when you press
recharge the Remote set. It should automatically turn on. Please recharge for 1
day before using.
● To turn off the power : Press
8
11V or 12V DC 500mA
11V or 12V DC 500mA
button until you hear the beeping sound.
button, then you probably need to
button until you hear the beeping sound.
Loading the battery to the Remote set
Open the
Connect the
1
battery cover.
phone line.
Connect the
power to 220V.
How to use the battery?
●
Charge the battery for 24 hours before using.
●
When you are not using the Remote set for a
1
2
3
long time, always remove the battery from
4
5
6
the handset.
7
8
9
●
It is best to charge the battery until you see
0
the
Connect the
power to 220V.
Battery life
Place the battery as
Close the
2
3
shown in the
battery cover.
picture and
rearrange the line.
@@ @@
@@
sign on the screen.
●
The battery life has a 6 months warrantee after purchase.
●
As time goes by, there will be a reduction in the battery's
power. When it is reduced by half, then purchase a new
one and replace it.
9
Advertisement
Table of Contents
