● This is used only in the base set.
To record your voice for auto-answering
When the recording does not work
You will then hear a beep
tone along with a recorded
● Press and hold down
until you hear a
If you press
button shortly after recording your voice, the
message will be selected as shown.
▶ This means that the message is too short (less then 3 seconds).
In this case, please try again.
▶ If the quality of the recorded voice is not good, it thus means
that you have recorded either too close to or too far away from
the mike. Try to keep about 30 cm from the mike.
(in standby mode)
● Record your voice (your ongoing message).
Selecting an active message from some recorded messages.
▶ If you have not recorded your voice, it will play the default message in the phone.
● Press the Play/stop
button to end the
● It will then repeat the
ongoing message once.
I am not