Selecting The Turbo Operating Mode; Selecting The Mild Operating Mode - Samsung APH-2807ERX Owner's Instructions Manual

Selecting the Turbo Operating Mode

The turbo cooling(heating) operation function provides heavy duty
cooling(heating) for 30 minutes regardless of the set temperature.
Therefore, you can instantly get cool(warm) in this operation mode when
you feel it is very hot(cold) in the room after returning home from outside.
After 30 minutes turbo operation, the unit returns automatically to the
operation mode previously set.
1 If necessary, press the ON/OFF(
Result: The OPER. light on the indoor unit switches on.
The operation mode previously set is displayed.
The indoor unit beeps twice.
The air conditioner starts up in the current mode.
2 Check to see whether the operation mode is positioned at "AUTO",
"COOL" or "HEAT"; the turbo cooling(heating) operation cannot be
selected when the unit is in the "DRY" or "FAN" operation mode.
3 Press the TURBO button.
When the unit is in the turbo operation mode, the set
NOTE
temperature and air flow quantity are automatically controlled.
Therefore, it is not necessary to make any separate selection.
Press the TURBO button again to cancel the turbo operation.
(Then the unit returns to the operation mode previously set.)

Selecting the Mild Operating Mode

The mild cooling(heating) operation function provides automatic control
of the set temperature and air flow quantity to ensure pleasant operation
during, sleeping or when used by elderly people.
The mild operation function stops automatically after operating for three
hours.
1
If necessary, press the ON/OFF(
Result: The OPER. light on the indoor unit switches on.
The operation mode previcusly set is displayed.
The indoor unit beeps twice.
The air conditioner starts up in the current mode.
2 Check to see whether the operation mode is positioned at "AUTO",
"COOL" or "HEAT" ; the mild cooling(heating) operation cannot be
selected when the unit is in the "DRY" or "FAN" operation mode.
3 Press the MILD button.
When the unit is in the mild operation mode, the set
NOTE
temperature and air flow quantity are automatically controlled.
Therefore, it is not necessary to make any separate selection.
Press the MILD button again to cancel the mild operation.
(Then the unit returns to the operation mode previously set.)
) button.
) button.
C
C
13
E-