Selecting the Automatic Operating Mode
8
E-
In the Automatic mode, the room temperature and the
fan speed are controlled automatically.
1
If necessary, press
Result:
The On/Off indicator on the indoor unit or
receiver & display unit comes on.
The air conditioner runs in the mode
selected when the unit was last used.
The indoor unit or receiver & display unit
beeps.
IMPORTANT
The air conditioner is fitted with a
protection mechanism to prevent the unit
from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
To select the AUTO mode, press the Mode button until
is displayed at the top of the wireless remote controller.
Result:
The indoor or receiver & display unit unit
beeps.
The air conditioner runs in AUTO mode.
N N
o o
t t
e e
You can change modes at any time.
N N
o o
t t
e e
(ON/OFF) button.