Setting the Time
C
8
E-
Your air conditioner contains a clock used to start or stop the unit
automatically at a given time.
You must set the time when you:
Purchase the air conditioner
Replace the batteries
Be sure to change the time in an area where summertime
NOTE
is applied.
1
Insert the batteries.
Result:
The TIME indicator flashes.
To set the time during the operation.
NOTE
Open the lid on the rear side of the remote control, and press the
(time set) button using a tool with a sharp end point.
Result:
The TIME indicator flashes.
2
Press the TIME
Press the TIME
or
or
Each time the ( ) button is pressed, the time increases
NOTE
by one minute.
When the ( ) button is continually pressed,
the time increases by ten minutes.
Each time the ( ) button is pressed, the time decreases
by one minute.
When the ( ) button is continually pressed,
the time decreases by ten minutes.
Result:
AM or PM are displayed to indicate whether the setting
corresponds to a time before or after midday.
3
After setting the time, press the
Result:
The Time indicator stops flashing and the clock is started.
buttons, and set the current time.
buttons, and set the current time.
(time set) button one more time.