Selecting The Auto Operating Mode - Samsung APH-2807ERX Owner's Instructions Manual

Selecting the Auto Operating Mode

C
10
E-
You can start the air conditioner in AUTO mode .
1 If necessary, press the ON/OFF(
Result: The OPER. light on indoor unit switches on.
The operation mode previously set is displayed.
The indoor unit beeps twice.
The air conditioner starts up in the current.
The air conditioner is fitted with a protection feature
IMPORTANT
which prevents the unit from being damaged when
it is started immediately after being:
Switched on
Stopped
After a rest period of three minutes, it will start up normally.
2 If the AUTO indicator is not displayed at the top of the remote control,
press MODE under the remote control flap one or more times until it
appears.
Result: The indoor unit beeps each time you press MODE.
The air conditioner starts up in AUTO mode.
In AUTO mode, the optimum fan speed is selected automatically
NOTE
and cannot be changed.
You can, however, change modes at any time when the
air conditioner is operating.
How to control the standard temperature.
When the unit is in automatic operation mode, the standard
temperature is automatically set.
However, the standard temperature can be adjusted
up to ±2°C by pressing the TEMP.SET
depending upon the user.
• Upward control by +2°C from the standard temperature
• Upward control by +1°C from the standard temperature
• Standard temperature
• Downward control by -1°C from the standard temperature (
• Downward control by -2°C from the standard temperature (
) button.
or buttons
( )
( )
( )
)
)