Deleting An Active Timer; Using The Tv / Stb Button; Watching Locked Channels - Philips DTR300/00 User Manual

DTR 300 sans esp_140205.qxd 14/02/05 16:16 Page 21
6.9.3

Deleting an active timer

A timer is active and you are watching what you are
recording. Recording is signalled by LED1 lit in red and LED2
lit in green.
- Press key sequence "TIMER, 0" to delete the active timer.
A timer is active and your receiver is in standby. Recording is
signalled by LED1 lit in red and LED2 lit in orange.
- Press key sequence "TIMER, 0" to delete the active timer.

6.10 Using the TV / STB button

This button is used to switch between watching digital
channels via your digital receiver and standard analogue
channels on your TV.
You are watching digital TV.
- Press the TV/STB button to switch to analogue TV from
your TV.
- Press the TV/STB button again to revert to digital TV.

6.11 Watching locked channels

If you have selected a locked channel, you must unlock this
channel to watch it.
When prompted to enter your PIN code:
- Enter your 4-digit PIN code (default is 1234).
DAY TO DAY OPERATION 21