Setting A Timer From The Banner; Setting A Timer From The Epg; Deleting An Active Timer; Your Receiver Is Blocked With The Front Panel Leds Lit Respectively In Red And Orange/Green - Philips DSR 2010 User Manual

6.8.1

Setting a timer from the banner

While watching TV or listening to the radio press <INFO>
to display the banner.You have plenty of time to program
your TIMER for the NOW or NEXT programme.
- Press the <TIMER> button once to set a recording timer
on the current programme, i.e. programme instant
recording. Press <TIMER> again to cancel the timer.
6.8.2

Setting a timer from the EPG

- Press the <TIMER> button once to set a recorder on the
next programme. Press the <TIMER> button once again to
set a reminder on the next programme. Pres <TIMER> a
third time to cancel the timer.
Note: in case the channel broadcasting the programme you want
to set a timer on is locked, you will be prompted to enter
your password.
To edit a timer from the EPG:
- Move the focus to the desired programme and press the
<OK> button to access the Timer edition screen.
6.8.3

Deleting an active timer

A timer is active; recording is signalled by the front panel
LEDs lit respectively in red and orange.
To delete the active timer:
- If your receiver is in standby, press the front panel <+> or
<-> button or the remote control <P+>, <P->, or
<TV/RADIO> button, or any number button on the
remote control to wake it up.The orange LED turns
green.
- Press the key sequence <TIMER> + <0> to cancel the
active timer.The red LED then goes out and you can
change channels.
6.8.4 Your receiver is blocked with the front
panel LEDs lit respectively in red
and orange/green
Your receiver is blocked because a recording is running.
- Press successively <TIMER> then <0> to delete the
-
DAY TODAY OPERATION 23