Table of Contents
Advertisement
NOTICE DTR 500.qxd
6.9.3
Deleting a running timer
A timer is running and you are watching what you are
recording. Recording is signalled by LED1 lit in red and LED2
lit in green.
- Press key sequence "TIMER, 0" to delete the running timer.
A timer is running and your receiver is in standby. Recording
is signalled by LED1 lit in red and LED2 lit in orange.
- Press key sequence "TIMER, 0" to delete the running timer.
6.10 DIGITAL TEXT – MHEG interactive
television
- Depending on the application, press either the <TEXT>
button (white colour button) or the red colour button to
enable digital teletext. Note that not all channels transmit
interactive television applications at all times.
Note: programmes carrying interactive television are signalled by
the "
" icon in the banner.
6.11 Using the TV / STB button
This button is used to switch between watching digital
channels via your digital receiver and standard analogue
channels on your TV.
You are watching digital TV.
- Press the TV/STB button to switch to analogue TV from
your TV.
- Press the TV/STB button again to revert to digital TV.
6.12 Watching locked channels
If you have selected a locked channel, you must unlock this
channel to watch it.
When prompted to enter your PIN code:
- Enter your 4-digit PIN code (default is 1234).
You can change the receiver settings to adapt the receiver to
your aerial conditions, Audio/Video set up or other
preferences.
7/09/2004
15:25
Page 21
DAY TO DAY OPERATION 21
Advertisement
Table of Contents
