Volume; Remote Control; Installation; Service Lists - Philips DTR300/00 User Manual

DTR 300 sans esp_140205.qxd

7.2.3.4 Volume

This item is used to select the volume level at start-up.
i
- Press the button to access setting value.
t y
- Press or to modify the volume level.
- Press <OK> to confirm.

7.2.3.5 Remote Control

This item is used to set the remote control address.
i
- Press the button to access the available values.
- Move to the address you want to select: 039 or 038.
- Press <OK> to confirm your selection.
- Proceed as described in paragraph 9.1.
If you do not complete the procedure as described
in paragraph 9.1, you will not be able to control
your receiver using your remote control.
7.3

Installation

- Press the <MENU> button to open the main menu.
y
- Press the button to select Installation.
i
- Press the button to access the Installation sub-menu.
7.3.1

Service lists

This item is used to manage your service lists.
i
- Press the button to access the service list features.

7.3.1.1 Rearrange services

This feature is used to install/uninstall services and move
services within the installed services list.
- First scroll to the service you want to
uninstall/install/move.
- Press <OK> to select the service.The service name
appears in the Selected service zone.
To install a service you have selected from the list:
- Scroll to the position where you want to install the service.
- Press the green colour button.The service is removed
from the uninstalled service list and appears in the
installed services list.
To move the service you have selected within the
list:
14/02/05 16:16 Page 25
CHANGE THE SETTINGS OF YOUR RECEIVER 25