Connecting To Your Hifi/Audio Receiver; Connecting To A Video Projector - Philips DTR300/00 User Manual

DTR 300 sans esp_140205.qxd
4.2 Connecting to your HiFi/Audio receiver equipment.
(Analogue/Digital)
Depending on your HiFi / Audio receiver equipment, you might have several options to connect your
digital receiver.
Analogue
Analogue connection (A)
Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio
equipment by means of a double CINCH cable (not supplied). Consult the user manual of your
HiFi/Audio receiver equipment to choose the proper analogue audio inputs.
Note: with this connection set up you can control the audio volume up/down and mute with the remote
control of your digital receiver and alternatively with your HiFi's remote control.
Digital connection (B)
Connect the audio "DIGITAL" output socket to the relevant digital audio input socket of your audio
equipment by means of a single CINCH cable (not supplied). Consult the user manual of your
HiFi/Audio receiver equipment to choose the proper digital audio input.
Note: with this connection set up you can only control the audio volume up/down and mute with your
HiFi / Audio Receiver remote control, refer to the relevant user manual.
4.3

Connecting to a video projector

- Connect the "TV" SCART socket of your digital receiver to your video projector.
Often a video projector is fed with S-Video format video signal. If this is the case with your video
projector, follow the instructions below for connection and installation:
- Connect a SCART/S-Video adapter to the "TV" SCART of your receiver (not supplied), and
connect the adapter to the S-Video input of your video projector by means of a S-Video cable.
- Refer to paragraph 7.2.3.1 to change the TV "Video Output" setting of your digital receiver to Y/C.
14 CONNECTING YOUR DIGITAL RECEIVER
14/02/05
Terrestrial Receiver
A
Audio equipment
AUDIO
input
L R
16:16 Page 14
B
Digital
input
to AC outlet