Change The Settings Of Your Receiver; General Information; Basic Menu Navigation; Change Setting - Philips DTR300/00 User Manual

DTR 300 sans esp_140205.qxd
7

Change the settings of your receiver

22 CHANGE THE SETTINGS OF YOUR RECEIVER
14/02/05 16:16 Page 22
You can change the receiver settings to adapt the receiver to
your aerial conditions, Audio/Video set up or other
preferences.
7.1

General information

7.1.1

Basic menu navigation

- In normal viewing mode, press <MENU> to display the
Main Menu, including the Puck.
The Puck is always present when the menu is displayed.
The Puck contains 5 elements:
- the yellow ball indicating the current selection;
- the t, y, u and i green cursors, with red arrows
indicating possible navigation directions.
Note: the Puck cursors are transferred to the right-hand side of the
menu window for the adjustment of the settings.The up,
down, right and left cursors appear at the top, bottom, left-
hand side, and right-hand side of the window respectively.
- Press <MENU> to exit any menu screen.
7.1.2

Change setting

The selection is on the first item of the menu.
- Press the t or y button to scroll up/down to select the
wanted menu item.
- Press the ibutton to display the sub-items corresponding
to the highlighted item. Repeat this step as many times as
necessary to access the desired option.
Note: press <BACK> to go back one level in the menu.
- Then use the arrow buttons to move to the desired
setting, or enter a value using the number buttons.
- Press <OK> to confirm if necessary.The selection is
brought back one level in the menu.
Notes:
- To open a menu item signalled by a lock, you must enter your
PIN code.
- To avoid burning your TV screen on-screen messages/menus are
automatically set off after 20 min.