General Information - Edelbrock 70405 Owner's Manual

1.0 Introduction to your Edelbrock 4.6L Mustang Performer EFI Nitrous System
Within the pages of this manual is information, safety tips and operation instructions for your new Edelbrock Nitrous System. Watch
for these symbols to know where to go for information.
....There is safety related information here.
....shows where technical information about your vehicle or specific skills that may help during
installation.
℡
....call Edelbrock Technical support hotline for more information.
1.1

General Information

The Edelbrock 4.6L Mustang Performer EFI Nitrous System (Part Number 70405) is designed for
1999-Later Mustang vehicles equipped with stock or slightly modified 4.6L engines that utilize the
returnless style fuel system. Horsepower and torque increases can vary with equipment upgrades and
modifications.
The system utilizes one nozzle that is installed in the intake boot just after the MAF (mass air sensor) filter and
before the throttle body. The additional fuel needed is supplied by the vehicle's standard fuel system.
This system has been designed with some flexibility as to where certain components can be located to allow easy
installation on vehicles with upgraded or modified equipment . The solenoid and microswitch brackets are designed
to be manipulated (bent, cut, twisted, etc.) and the electrical components have properly sized and ample lengths of
wire.
This system includes the bottle (shipped empty), bottle feed line and universal footprint steel bottle brackets. The
mounting brackets also include rubber insulators to protect the surface of your nitrous bottle while mounted in the
brackets. When installing your nitrous bottle, pay close attention to the installation instructions for the location of
your bottle. Make sure that the installation of your bottle does not interfere with any systems that may lie under
the location where you plan to drill holes for mounting the brackets.
Contact your local automotive store, motorcycle shop or race track for refilling of your bottle. Trust a professional
to properly fill your bottle and reference your installation manual when re-installing your filled bottle back into your
vehicle.
Always take care when handling a full bottle of nitrous oxide. Please reference this manual for further safety
measures to take during the handling of a nitrous oxide bottle.
Please follow all safety methods during the installation of your Edelbrock Nitrous System, and follow all vehicle
regulations and road laws when using your nitrous system.
©2002 Edelbrock Corporation
Brochure No. 63-0029
Page 5 of 26
Rev. 12/02