Before You Install Your Edelbrock Nitrous System - Edelbrock 70403 Installation Manual

Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools
Socket set including ratchets and extensions
Screwdrivers
Pliers
Bench vise
Wire crimping pliers, wire strippers
Floor jack
Vehicle jackstands
Safety glasses
Power Tools
Power drill
Drill bits (1/4", 1/2" and 3/8")
You should understand the following skills:
Power tool safety procedures
Undercar safety procedures
Proper measuring techniques
Proper electrical assembly techniques
Basic engine operation and tuning
℡ Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our
Catalog #70403
Brochure No. 63-0147
Caution!!

Before You Install Your Edelbrock Nitrous System...

Technical Support Hotline at 1-800-416-8628
before you start your engine.
Page 3 of 22
©2003 Edelbrock Corporation
Rev. 1/03