Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools
Socket set including ratchets and extensions
Screwdrivers
Pliers
Bench vise
Wire crimping pliers, wire strippers
Floor jack
Vehicle jack stands
Measuring tape and placement markers
Timing light
Fuel pressure measurement gauge
Safety glasses
Power Tools
Power drill
Drill bits
You should understand the following skills:
Power tool safety procedures
Undercar safety procedures
Proper measuring techniques
Proper electrical assembly techniques
Basic engine operation and tuning techniques which include:
- Fuel pressure measurement techniques
- Timing adjustment techniques
Caution!!
Before You Install Your Edelbrock
Nitrous System...