Table of Contents
Advertisement
Digital Output
Set the Digital output according to your
optional audio equipment connection.
1
Press 34 to highlight 'Digital Output'.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 34 to
highlight the selected item.
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
4
Press OK, then press 1 to return to
Audio Setup Page.
Helpful Hint:
–
If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
DVD Menu Options
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
1
Press 34 to highlight 'LPCM Output'.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 34 to
highlight the selected item.
48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
96kHz: Playback a disc recorded at the
sampling rate of 96kHz.
4
Press OK, then press 1 to return to
Audio Setup Page.
25
Advertisement
Table of Contents
