Table of Contents
Advertisement
Step 3: Setting language
preference
You can select your own preferred
language settings.This DVD system will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default language will be
used instead. The OSD language in the
system menu, will remain once selected.
Setting the OSD Language
1
Stop playback and press SYSTEM
MENU.
2
Press 4 3 to select 'General Setup' page.
3
Enter its submenu by pressing OK.
4
Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu.
Move to 'OSD Language' and press 2.
5
Select a language and press OK.
To remove the menu
Press SYSTEM MENU.
Getting Started
Setting the Audio, Subtitle and Disc
menu language
1
Stop playback (if any) and press SYSTEM
MENU.
2
Press 4 3 to select 'Preference Page'.
3
Enter its submenu by pressing OK.
4
Press 3 4 to highlight the following in the
Preference Page.
– 'Audio' (disc's soundtrack)
– 'Subtitle' (disc's subtitles)
– 'Disc Menu' (disc's menu)
5
Enter its submenu by pressing 2.
6
Select a language and press OK.
7
3
Repeat steps
~
To remove the menu
Press SYSTEM MENU.
If you choose OTHERS in Audio,
Subtitle or Disc Menu,
1
Press 3 4 to highlight 'Others'.
2
Press OK and when you are asked to
enter a language code (see 'Language
Code' at the end of this user manual).
3
Input a language code by using the
numeric keypad (0-9).
4
Press OK to confirm.
5
for other settings.
15
Advertisement
Table of Contents
