Digital Output; Night Mode; Down Sampling - Philips DVP3146X Manual

Table of Contents

Advertisement

Digital Output

Select this if you connect to a
multichannel decoder/receiver.
A
In 'Audio', press
Output }, then press
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{ PCM }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{ Off }
To deactivate the digital audio output.
For example, if you use the FRONT (L/R)
AUDIO OUT sockets to connect to a TV
or stereo system.
B
Use
to select a setting and press
OK to confi rm.
Tips:
– If { Digital Output } is set to { All }, all
audio settings except MUTE are invalid.
– If { Digital Output } is set to { All } while
playback MPEG, MP3/WMA fi les, the player
will output PCM signals.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
01-44_dvp3146_94_eng1.indd 33
01-44_dvp3146_94_eng1.indd 33
DVD Menu Options
to select { Digital
.
A
B
A
B

Night Mode

This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
In 'Audio', press
to select { Night
Mode }, then press
.
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
Use
to select a setting and press
OK to confi rm.

Down Sampling

You can enable and disable the digital
signal for better sound output quality.
In 'Audio', press
to select { Down
Sampling }, then press
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Use
to select a setting and press
OK to confi rm.
(continued)
.
33
2007-01-31 2:02:28 PM
2007-01-31 2:02:28 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp3146

Table of Contents