Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
To select a playback feature or item
Use the 1 2 3 4 or numeric keypad
(0-9) on the Remote Control, then press
PLAY B to start playback.
To access or remove the menu
Press DISC MENU on the Remote
Symbols Used in this Manual
The below symbols appear in some
headings and notes with the following
– Description refers to playback of DVD-video discs
– Description refers to playback of Video CDs
– Description refers to playback of Audio CDs
– Description refers to playback of MP3 files
– Description refers to playback of JPG files
– Description refers to playback of DivX files
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
During playback, press PAUSE ;.
Playback will pause and sound will be
Press PAUSE ; again to select the
previous or next picture frame.
To return to normal playback, press
Press and hold T / S, then press B
to resume normal playback.
While searching, pressing T / S
again will decrease/increase the search
Press MUTE repeatedly to disable and
enable the sound output.
Resuming playback from the last
Resume playback of the last 5 discs is
possible, even if the disc was ejected or
the power switched off.
Load one of the last 5 discs.
Press PLAY B and the disc will be
played back from the last point.
To cancel resume mode
In stop mode, press STOP 9 again.
Resume option may not be available on