Table of Contents
Advertisement
Basic Operations
1
Press SYSTEM MENU in the STOP
mode to enter the Setup Menu.
2
Press OK to enter the next level
submenu or confirm your selection.
3
Press 1 2 to enter the submenu or
return to the previous menu.
4
Press 34 to highlight the desired menu.
5
Press SYSTEM MENU to quit the setup
menu.
The settings will be stored in the
player's memory even if the player is
switched off.
General Setup menu
The options included in General Setup
menu are: 'OSD Language', 'Screen Saver'
and 'Smart Power'.
Follow the steps below:
1
Press SYSTEM MENU to enter the
setup menu.
2
Press 3 4 to select the 'General Setup'
page.
3
Press OK to confirm.
NOTE:
Some of the features in the DVD
Menu Options are described in
"Getting Started".
DVD Menu Options
Screen Saver
This function is used to turn the screen
saver on or off.
1
Press 34 to highlight 'Screen Saver'.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 34 to
highlight the selected item.
Off: Screen saver is disabled.
On: In STOP or No DISC mode, if no
actions are performed within 5 minutes,
the screen saver will be activated.
4
Press OK, then press 1 to return to
General Setup Page.
Smart Power
When in 'Stop' or 'No Disc' mode, the
DVD Player will switch to standby mode
after 15 minutes of inactivity for energy
saving.
1
Press 34 to highlight 'Smart Power'.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 34 to
highlight the selected item.
Off: Smart Power is disabled.
On: In STOP or No DISC mode, if no
actions are performed for 15 minutes, the
smart power will be activated.
4
Press OK, then press 1 to return to
General Setup Page.
23
Advertisement
Table of Contents
