Using The Audio Setup Menu; Digital Output - Philips 437 User Manual

DVD Menu Options

Using the Audio setup menu

A
Press SETUP on the remote control.
The system setup menu appears.
Language Language
Aspect Ratio

Digital Output

View Mode Night Mode
Video Video
Down Sampling TV System
Video Out
Audio Audio
Smart Picture
Rating Rating
Misc Misc
B
Press to select { Audio }, then
press .
C
Press to select an item, then press
to access.
Example: { Night Mode }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D
Use to select a setting and press
OK to confi rm.
Example: { On }
The setting is selected and setup is
complete.
E
To exit, press SETUP.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
30
01-39_xDV437_438_55_77_eng2.indd30 30 01-39_xDV437_438_55_77_eng2.indd30 30
(continued)
Digital Output
Select this if you connect to a
multichannel decoder/receiver.
A
In 'Audio', press
Output }, then press
{ All }
Select this if the connected device has a
: : 4:3 All
: Auto Fit : Off
built-in multichannel decoder that
: NTSC : On
supports one of the multichannel audio
: Component
format (Dolby Digital, MPEG-2).
: Personal
{ PCM }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{ Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
B
Use
OK to confi rm.
Tips:
– If { Digital Output } is set to { All }, all
audio settings except MUTE are invalid.
– If { Digital Output } is set to { All } while
playback MPEG, MP3/WMA fi les, the player
will output PCM signals.
to select { Digital
.
to select a setting and press
2007-01-03 11:20:56 AM 2007-01-03 11:20:56 AM