Download  Print this page

Favorite Track Selection; Digital Output; Dynamic Range; Tv Output - Philips DVD761K Service Manual

Hide thumbs

Advertisement

At second level submenu, you can simply use 34 key and SELECT key to change
0
and confirm options, use RETURN key to turn back to the main menu.
0
For a instance, set the front speaker. There are two options in the item, one is
LARGE, the other is SMALL. LARGE means the large speaker which can reproduce
the sound lower than 50Hz; small means the contrary, the speaker have no the
capability of reproducing bass. The option is set for the substitution of subwoofer,
if you don't have subwoofer, the LARGE option makes the bass component output
from front speaker instead. Follow this way, you can set the items CENTER,
SURROUND and SUBWOOFER.
APPENDIX: Here are some useful information which can help you to setup speakers.
1. A standard DVD disc is recorded with multi_channel audio tracks, and these audio
channels cooperate reproducing the sound environment which is so called HOME
CINEMA. The center speaker is used to output dialogs in a movie. So if the item
CENTER TYPE is closed, you won't hear the conversation of a movie.
2. Sound which comes from rear place is not as sensitive as it comes from front, so
it is enough to use small speaker for surround type.
3. People can't distinguish the direction of low frequency sound, so you can furnish
the subwoofer in any place in the room.
FTS - Favorite Track Selection
0
FTS enables you to play a VCD or DVD karaoke disc in a certain order of tracks,
the maximum quantity can be 20 and every track can be stored several times.
0
You can set your FTS for a DVD karaoke disc following the steps below:
1. Use 34 keys to highlight item SELECT FTS then press SELECT key to enter
the submenu. ( Refer to fig .2)
2. In the submenu, you need to input titles and chapters you like. ( You can see the
hint on the screen which shows the range you can choose, if you enter a umber
fig .1
which is out of the range, it won't be accepted.)
3. Pressing the SELECT key on the remote control, input a number of title in the
highlighted line, then press SELECT key again. Now the cursor moves to the
chapter column. Input an available number of chapter, press SELECT key to
close setting this track.
4. Use 34 keys to move the cursor to next line, set another track in this way.
Pressing PLAY key to start playing FTS.
0
VCD karaoke discs don't have titles and chapters, only have tracks. So you need
only set the tracks.
fig .2
You can set your FTS for a DVD karaoke disc following the steps below:
0
1. Use 34 keys to highlight item SELECT FTS then press SELECT key to enter
the submenu. ( Refer to fig .3)
2. In the submenu, you need to input the number of your favorite tracks. ( Also see
the hint on the screen which shows the range you can choose, if you enter a
umber which is out of the range, it won't be accepted.)
3. Press SELECT key on the remote control, input an available nomber of tracks in
the highlighted line then press the SELECT key again to confirm it.
4. Use 34 keys to move the cursor to next line, set another track in this way.
Pressing PLAY key to start playing FTS.
fig .3
Setup Menu
PCS 103 097
15
Setup Menu

Digital output

Audio output has two ways, they are digital audio output and analog audio output.
0
The digital audio output combines multi_channel analog audio output through an
optical cable or a coaxial cable, it can't be reproduced directly to sound unless it is
analysised by a decoder circuit in the DVD player or a reciever.
0
Digital audio output has different format, one of them is bit-stream ( BITSTRM ),
it is for the Dolby Digital (also known as AC-3 or Dolby 5.1) decode; the other is
LPCM, it is for the Linear Palus Coder Modulate decoder.
0
After you verify your decoder instrument, you can setup the item by this way: Use
34 keys to highlight item DIGITAL OUTPUT then use 12 keys to select a proper
option. Press SETUP key to save and quit the Setup Menu.

Dynamic range

Dynamic range is used to control original sound loudness of a movie automatically.
0
0
There are three options in the item:
1. FULL RANGE : Do not compress the dynamic range.
2. STANDARD TV : Compress the dynamic range for standard TV.
3. NIGHT TIME : Reduce the loud sound and increase faint soud, make it fit for
NOTE: The D.R.C function compress only has effect on low frequency signal.

TV output

0
There are two major Television standards, one is PAL, it is popular in Asia; the
other is NTSC (National Television Systems Committee) which is popular in
America. Now most of TV can play with both of these two standards, but if your
TV is old fashioned, you should setup the item to make it fit your TV.
You can setup the item by this way: Use 34 keys to highlight item TV OUTPUT
0
then use 12 keys to select a proper option. Press SETUP key to save and quit the
Setup Menu.

Color scheme

0
You can choose the color of letters and icons as you like.
Setup the item by this way: Use 34 keys to highlight item COLOR SCHEME
0
then use 12 keys to select a proper option. Press SETUP key to save and quit the
Setup Menu.
OSD language
You can change the On-Screen Display language.
0
Setup the item by this way: Use 34 keys to highlight item OSD LANGUAGE
0
then use 12 keys to select a proper option. Press SETUP key to save and quit the
Setup Menu.
PCS 103 097
15
watching during night time.

Advertisement

Table of Contents

   Related Manuals for Philips DVD761K

Comments to this Manuals

Symbols: 0
Latest comments: